Skip to content

Usage Guide ​

Complete usage documentation for the QM NMR Calculator, covering the web interface and calculation concepts.

Target audience: Researchers running NMR calculations and interpreting results.

Prerequisites: Complete the Installation Guide before using this guide.

Introduction ​

The QM NMR Calculator provides quantum mechanical prediction of 1H and 13C NMR chemical shifts using density functional theory (DFT). You can interact with the calculator through:

  • Web UI - Visual interface at http://localhost:8000 for molecule submission, job monitoring, and result visualization
  • REST API - Programmatic access for automation and integration (documented separately)

This guide covers:

  1. Web UI workflow (submit, status, results pages)
  2. DELTA50 single-conformer calculation workflow
  3. Solvent selection for COSMO solvation
  4. Calculation presets (B3LYP vs PBE0)

Web UI Workflow ​

The web interface consists of three main pages that guide you through the NMR calculation process.

Submit Page (/) ​

The home page is where you submit molecules for NMR calculation.

Molecule Input Options:

You can provide molecular structure in two ways (mutually exclusive):

  1. SMILES String - Enter the SMILES representation of your molecule

    • Example: CCO for ethanol, c1ccccc1 for benzene
    • Live preview shows your molecule as you type (rendered by the depict API)
    • The preview validates SMILES syntax before submission
  2. MOL/SDF File Upload - Upload a pre-built structure file

    • Accepts .mol and .sdf formats
    • Single molecule per file
    • Useful when you have 3D coordinates from other software

Required Settings:

SettingDescription
SolventNMR solvent environment (see Solvent Selection)

Optional Settings:

SettingDescription
PresetB3LYP (default) or PBE0; see Calculation Presets
Molecule NameLabel for your molecule (displayed in results)
Email NotificationGet notified when calculation completes

Each job runs the DELTA50 single-conformer protocol: one RDKit 3D structure, DFT optimization, GIAO shielding, and DELTA50 linear scaling.

Submitting:

Click "Calculate NMR" to start the calculation. You'll be redirected to the status page to monitor progress.

Note: Invalid SMILES or unsupported file formats will show an error message. The molecule preview helps catch SMILES errors before submission.

Status Page (/status/{job_id}) ​

After submission, you're redirected to the status page to monitor calculation progress.

Job Details Panel:

Shows your calculation settings:

  • Job ID (unique identifier)
  • Elapsed time since submission
  • Input SMILES
  • Solvent and preset selections

3D Molecule Preview:

An interactive 3D viewer shows the initial RDKit-generated geometry while the calculation runs. This is the starting structure before DFT optimization.

Step Progress Tracker:

Shows completion status for each calculation step:

  1. Geometry Optimization - DFT structure optimization
  2. NMR Calculation - Shielding tensor computation
  3. Post-processing - Spectrum generation and formatting

Auto-refresh Behavior:

The page automatically polls for updates every 3 seconds and redirects to the results page upon completion. If the job fails, an error message is displayed with the option to submit a new job.

Results Page (/results/{job_id}) ​

The results page provides comprehensive visualization and download options for completed calculations.

Interactive 3D Viewer:

The main feature is a rotatable 3D molecular structure with chemical shift labels:

  • Blue labels - 1H (proton) chemical shifts in ppm
  • Orange labels - 13C (carbon) chemical shifts in ppm
  • Click and drag to rotate, scroll to zoom

Spectrum Images:

  • 1H NMR Spectrum - Simulated proton spectrum (click to enlarge)
  • 13C NMR Spectrum - Simulated carbon spectrum (click to enlarge)

Both images can be downloaded as PNG files.

Chemical Shift Tables:

Separate tables for 1H and 13C shifts:

  • Atom index (H1, H2... or C1, C2...)
  • Chemical shift value in ppm

Downloads Section:

DownloadDescription
Geometry (XYZ)Optimized 3D coordinates in XYZ format
Geometry (SDF)Optimized structure with connectivity in SDF format
Raw Output (ZIP)Complete NWChem output files for detailed analysis
1H Spectrum (PNG)Simulated 1H NMR spectrum image
13C Spectrum (PNG)Simulated 13C NMR spectrum image
Structure (PNG)2D structure image

Calculation Workflow (DELTA50) ​

Predictions follow the DELTA50 benchmark protocol: one conformer per molecule.

How it works:

  1. RDKit embeds an initial 3D structure (or you upload MOL/SDF coordinates)
  2. NWChem optimizes the geometry at 6-31G* (B3LYP in the gas phase, PBE0 with COSMO solvation)
  3. GIAO NMR shieldings are computed on the optimized structure at 6-311+G(2d,p) with COSMO solvation
  4. Shieldings are converted to ppm using DELTA50 linear scaling factors

Typical timing:

  • B3LYP preset: roughly 15–45 minutes for small organic molecules (depends on size and CPU cores)
  • PBE0 preset: similar wall time, with somewhat higher 13C accuracy in the benchmark

Limitations:

  • Flexible molecules may have multiple low-energy conformations; a single geometry cannot reproduce experimental conformational averaging
  • Match the DELTA50 assumptions when comparing to experimental spectra (same solvent, static structure)

Solvent Selection ​

Solvent environment affects both geometry optimization and NMR shielding calculations through the COSMO solvation model.

Available Solvents ​

SolventDisplay NameCommon Use
acetoneAcetone (Acetone-d6)Medium polarity
acetonitrileAcetonitrile (CD3CN)Polar aprotic
benzeneBenzene (Benzene-d6)Aromatic/nonpolar compounds
chcl3Chloroform (CDCl3)Standard organic chemistry
dcmDichloromethane (CD2Cl2)Halogenated solvent
dmfN,N-Dimethylformamide (DMF-d7)High-boiling polar aprotic
dmsoDMSO (DMSO-d6)Polar compounds
methanolMethanol (Methanol-d4)Protic polar solvent
pyridinePyridine (Pyridine-d5)Basic aromatic solvent
thfTetrahydrofuran (THF-d8)Ethereal solvent
tolueneToluene (Toluene-d8)Aromatic nonpolar
waterWater (D2O)Aqueous samples

COSMO Solvation Model ​

The calculator uses the Conductor-like Screening Model (COSMO) to simulate solvent effects:

What COSMO does:

  • Creates a cavity around the solute molecule
  • Models the solvent as a dielectric continuum
  • Calculates electrostatic screening from induced surface charges
  • Affects both molecular geometry and electronic properties

Impact on results:

  • Polar groups experience different shielding in polar vs non-polar solvents
  • Geometry can change slightly between solvents
  • Hydrogen bonding effects are approximated (not explicit)

Choosing the Right Solvent ​

Match your experimental conditions:

The most important rule is to select the solvent that matches your experimental NMR spectrum. Solvent effects on chemical shifts can be significant (0.1-1.0 ppm for 1H).

Chloroform (CDCl3):

  • Most common choice for organic molecules
  • Good for non-polar to moderately polar compounds
  • Use when your experimental spectrum was recorded in CDCl3

DMSO (DMSO-d6):

  • Better for polar molecules with hydrogen bond donors/acceptors
  • Common for pharmaceuticals, natural products
  • Larger dielectric constant captures polar interactions

Gas phase (vacuum):

  • Reference calculations without solvent effects
  • Comparing with gas-phase experimental data
  • Understanding intrinsic vs solvent-induced shifts

Note: If you don't know which solvent to use, CDCl3 is a safe default for most organic molecules.

Calculation Presets ​

A preset fixes the DFT functional and the protocol around it. There are two, named after their functional: B3LYP (the default) and PBE0. Both use the same basis sets and are calibrated against the same DELTA50 benchmark, so either gives publication-quality shifts. They differ only in the functional and in where the geometry is optimized.

B3LYP (b3lyp, default)PBE0 (pbe0)
Geometry optimizationB3LYP/6-31G*, gas phasePBE0/6-31G*, COSMO in the chosen solvent
NMR shieldingGIAO B3LYP/6-311+G(2d,p), COSMOGIAO PBE0/6-311+G(2d,p), COSMO
1H MAE, CDCl30.06 ppm0.08 ppm
13C MAE, CDCl31.86 ppm1.71 ppm
Wall timesimilarsimilar

MAE is the mean absolute error of the DELTA50 regression; the full table for all 12 solvents is in Expected Accuracy. Each preset copies the geometry protocol its scaling factors were fitted on, which is why B3LYP optimizes in the gas phase and PBE0 does not.

Which one to choose:

  • B3LYP if 1H shifts matter most, or if you have no preference. It is ahead of or level with PBE0 for 1H in every solvent.
  • PBE0 if 13C shifts matter most. It is about 0.15 ppm better for 13C in every solvent.

The preset key (b3lyp or pbe0) is what you pass to the API and in batch CSV files.

Tips for Best Results ​

Before Submission ​

  1. Validate your SMILES - Use the live preview to catch syntax errors
  2. Match experimental solvent - Use the same solvent as your NMR experiment
  3. Pick the preset for your nucleus - B3LYP is slightly better for 1H, PBE0 for 13C

Interpreting Results ​

  1. Compare spectrum patterns - Overall shape and relative positions matter more than absolute values
  2. Account for systematic errors - DFT shifts may be uniformly offset from experiment
  3. Remember single-conformer limits - Highly flexible structures may need external conformer sampling

Performance Tips ​

  1. Start with a small molecule - Verify your setup before committing to a large calculation
  2. Monitor job status - Long-running jobs can be checked via the status page

REST API Reference ​

The REST API provides programmatic access for automation and integration with other tools.

Overview ​

PropertyValue
Base URLhttp://localhost:8000/api/v1
AuthenticationOptional ORCID login (session cookie; institutional accounts via ORCID's institutional AAI). Web job submission (/submit) requires login when ORCID is configured. The REST API stays public for anonymous clients; when a session is present, submitted jobs are owned by that user and delete/rerun/reanalyze of owned jobs require the owner.
Content-Typeapplication/json (requests and responses)
WorkflowAsynchronous: submit returns 202, poll for completion

Health Endpoints ​

Liveness Probe:

bash
curl http://localhost:8000/health

Response:

json
{"status": "alive"}

Readiness Probe:

bash
curl http://localhost:8000/health/ready

Response:

json
{
  "status": "ready",
  "checks": {
    "data_directory": "ok",
    "task_queue": "ok"
  },
  "timestamp": "2026-02-01T12:00:00Z"
}

If any component is unavailable, returns HTTP 503 with "status": "not ready".

Job Submission ​

Submit via SMILES (POST /api/v1/jobs):

bash
curl -X POST http://localhost:8000/api/v1/jobs \
  -H "Content-Type: application/json" \
  -d '{
    "smiles": "CCO",
    "solvent": "chcl3",
    "preset": "b3lyp",
    "name": "Ethanol",
    "notification_email": null
  }'

Request body fields:

FieldTypeRequiredDescription
smilesstringYesSMILES representation of molecule
solventstringYesNMR solvent (see README for all 13 codes, e.g., chcl3, dmso, acetonitrile)
presetstringNob3lyp or pbe0 (default: b3lyp); see Calculation Presets
namestringNoOptional molecule label (max 100 chars)
notification_emailstringNoEmail for completion notification

Response (HTTP 202 Accepted):

json
{
  "job_id": "a1b2c3d4e5f6",
  "status": "queued",
  "created_at": "2026-02-01T12:00:00Z",
  "input_smiles": "CCO",
  "input_name": "Ethanol",
  "preset": "b3lyp",
  "solvent": "chcl3"
}

Headers:

  • Location: /api/v1/jobs/a1b2c3d4e5f6 - URL for status polling
  • Retry-After: 30 - Suggested polling interval

Submit via File Upload (POST /api/v1/jobs/upload):

bash
curl -X POST http://localhost:8000/api/v1/jobs/upload \
  -F "file=@molecule.mol" \
  -F "solvent=chcl3" \
  -F "preset=b3lyp"

Accepts .mol and .sdf files with a single molecule. Returns same response format as SMILES submission.

List Available Solvents (GET /api/v1/jobs/solvents):

bash
curl http://localhost:8000/api/v1/jobs/solvents

Response:

json
["acetone", "acetonitrile", "benzene", "chcl3", "dcm", "dmf", "dmso", "methanol", "pyridine", "thf", "toluene", "vacuum", "water"]

Job Status ​

Get Job Status (GET /api/v1/jobs/{job_id}):

bash
curl http://localhost:8000/api/v1/jobs/a1b2c3d4e5f6

Response varies by job status:

Queued job:

json
{
  "job_id": "a1b2c3d4e5f6",
  "status": "queued",
  "created_at": "2026-02-01T12:00:00Z",
  "started_at": null,
  "current_step": null,
  "steps_completed": []
}

Running job:

json
{
  "job_id": "a1b2c3d4e5f6",
  "status": "running",
  "created_at": "2026-02-01T12:00:00Z",
  "started_at": "2026-02-01T12:00:05Z",
  "current_step": "geometry_optimization",
  "current_step_label": "Geometry Optimization",
  "step_started_at": "2026-02-01T12:00:05Z",
  "steps_completed": []
}

Complete job:

json
{
  "job_id": "a1b2c3d4e5f6",
  "status": "complete",
  "completed_at": "2026-02-01T12:15:00Z",
  "nmr_results": {
    "h1_shifts": [
      {"index": 1, "atom": "H", "shift": 3.65},
      {"index": 2, "atom": "H", "shift": 1.18}
    ],
    "c13_shifts": [
      {"index": 1, "atom": "C", "shift": 57.8},
      {"index": 2, "atom": "C", "shift": 18.2}
    ],
    "functional": "b3lyp",
    "basis_set": "6-311+G(2d,p)",
    "solvent": "chcl3",
    "scaling_factor_source": "DELTA50",
    "h1_expected_mae": "+/- 0.12 ppm",
    "c13_expected_mae": "+/- 1.95 ppm"
  }
}

Failed job:

json
{
  "job_id": "a1b2c3d4e5f6",
  "status": "failed",
  "error_message": "NWChem geometry optimization failed: SCF did not converge"
}

Polling pattern:

bash
# Poll every 30 seconds until complete
while true; do
  STATUS=$(curl -s http://localhost:8000/api/v1/jobs/a1b2c3d4e5f6 | jq -r '.status')
  echo "Status: $STATUS"
  if [ "$STATUS" = "complete" ] || [ "$STATUS" = "failed" ]; then
    break
  fi
  sleep 30
done

Results Retrieval ​

All result endpoints require status=complete. Returns HTTP 409 if job is still running.

NMR Shifts (GET /api/v1/jobs/{job_id}/results):

bash
curl http://localhost:8000/api/v1/jobs/a1b2c3d4e5f6/results

Response:

json
{
  "h1_shifts": [
    {"index": 1, "atom": "H", "shift": 3.65},
    {"index": 2, "atom": "H", "shift": 1.18}
  ],
  "c13_shifts": [
    {"index": 1, "atom": "C", "shift": 57.8},
    {"index": 2, "atom": "C", "shift": 18.2}
  ],
  "functional": "b3lyp",
  "basis_set": "6-311+G(2d,p)",
  "solvent": "chcl3",
  "scaling_factor_source": "DELTA50",
  "h1_expected_mae": "+/- 0.12 ppm",
  "c13_expected_mae": "+/- 1.95 ppm"
}

Optimized Geometry (XYZ format):

bash
curl http://localhost:8000/api/v1/jobs/a1b2c3d4e5f6/geometry \
  -o ethanol_optimized.xyz

Optimized Geometry (SDF format with bonds):

bash
curl http://localhost:8000/api/v1/jobs/a1b2c3d4e5f6/geometry.sdf \
  -o ethanol_optimized.sdf

3D Viewer Data (JSON with SDF + shift assignments):

bash
curl http://localhost:8000/api/v1/jobs/a1b2c3d4e5f6/geometry.json

Response includes XYZ, SDF, and atom-to-shift mappings for 3D visualization.

Raw NWChem Output (ZIP archive):

bash
curl http://localhost:8000/api/v1/jobs/a1b2c3d4e5f6/output \
  -o nwchem_output.zip

Spectrum Images:

bash
# 1H NMR spectrum
curl http://localhost:8000/api/v1/jobs/a1b2c3d4e5f6/spectrum/1h.png -o spectrum_1h.png
curl http://localhost:8000/api/v1/jobs/a1b2c3d4e5f6/spectrum/1h.svg -o spectrum_1h.svg

# 13C NMR spectrum
curl http://localhost:8000/api/v1/jobs/a1b2c3d4e5f6/spectrum/13c.png -o spectrum_13c.png
curl http://localhost:8000/api/v1/jobs/a1b2c3d4e5f6/spectrum/13c.svg -o spectrum_13c.svg

Annotated Structure Images:

bash
curl http://localhost:8000/api/v1/jobs/a1b2c3d4e5f6/structure.png -o structure.png
curl http://localhost:8000/api/v1/jobs/a1b2c3d4e5f6/structure.svg -o structure.svg

Error Handling ​

HTTP Status Codes:

CodeMeaningExample
200SuccessGET /jobs/{id}/results for complete job
202AcceptedPOST /jobs (job queued)
404Not FoundJob ID doesn't exist
409ConflictRequesting results for incomplete job
422Validation ErrorInvalid SMILES or solvent

Error Response Format (RFC 7807 Problem Details):

json
{
  "type": "https://qm-nmr-calc.example/problems/invalid-smiles",
  "title": "Invalid SMILES String",
  "status": 422,
  "detail": "RDKit failed to parse SMILES: 'invalid-smiles'"
}

Common error types:

  • invalid-smiles - SMILES string could not be parsed
  • invalid-solvent - Unknown solvent name
  • invalid-file-type - Uploaded file is not .mol or .sdf
  • job-not-found - No job exists with that ID
  • job-not-complete - Results requested before job finished

Complete Workflow Example ​

This bash script submits a job, polls for completion, and downloads all results:

bash
#!/bin/bash
# nmr_calculate.sh - Submit NMR calculation and download results
# Usage: ./nmr_calculate.sh "CCO" "ethanol"

SMILES="$1"
NAME="${2:-molecule}"
BASE_URL="http://localhost:8000"
TIMEOUT=3600  # 1 hour max

# Submit job
echo "Submitting $NAME ($SMILES)..."
RESPONSE=$(curl -s -X POST "$BASE_URL/api/v1/jobs" \
  -H "Content-Type: application/json" \
  -d "{\"smiles\": \"$SMILES\", \"solvent\": \"chcl3\", \"preset\": \"b3lyp\", \"name\": \"$NAME\"}")

JOB_ID=$(echo "$RESPONSE" | jq -r '.job_id')
if [ "$JOB_ID" = "null" ]; then
  echo "Error: $(echo "$RESPONSE" | jq -r '.detail')"
  exit 1
fi
echo "Job ID: $JOB_ID"

# Poll for completion
START_TIME=$(date +%s)
while true; do
  STATUS_RESPONSE=$(curl -s "$BASE_URL/api/v1/jobs/$JOB_ID")
  STATUS=$(echo "$STATUS_RESPONSE" | jq -r '.status')
  STEP=$(echo "$STATUS_RESPONSE" | jq -r '.current_step_label // "Waiting"')

  echo "Status: $STATUS - $STEP"

  if [ "$STATUS" = "complete" ]; then
    echo "Calculation complete!"
    break
  elif [ "$STATUS" = "failed" ]; then
    ERROR=$(echo "$STATUS_RESPONSE" | jq -r '.error_message')
    echo "Job failed: $ERROR"
    exit 1
  fi

  # Check timeout
  ELAPSED=$(($(date +%s) - START_TIME))
  if [ $ELAPSED -gt $TIMEOUT ]; then
    echo "Timeout after $TIMEOUT seconds"
    exit 1
  fi

  sleep 30
done

# Download results
mkdir -p "results_$NAME"
cd "results_$NAME"

echo "Downloading results..."
curl -s "$BASE_URL/api/v1/jobs/$JOB_ID/results" > nmr_shifts.json
curl -s "$BASE_URL/api/v1/jobs/$JOB_ID/geometry" -o optimized.xyz
curl -s "$BASE_URL/api/v1/jobs/$JOB_ID/geometry.sdf" -o optimized.sdf
curl -s "$BASE_URL/api/v1/jobs/$JOB_ID/spectrum/1h.png" -o spectrum_1h.png
curl -s "$BASE_URL/api/v1/jobs/$JOB_ID/spectrum/13c.png" -o spectrum_13c.png
curl -s "$BASE_URL/api/v1/jobs/$JOB_ID/output" -o nwchem_output.zip

# Display shifts
echo ""
echo "1H Chemical Shifts:"
jq -r '.h1_shifts[] | "  H\(.index): \(.shift) ppm"' nmr_shifts.json

echo ""
echo "13C Chemical Shifts:"
jq -r '.c13_shifts[] | "  C\(.index): \(.shift) ppm"' nmr_shifts.json

echo ""
echo "Results saved to results_$NAME/"

Result Interpretation ​

Understanding how to interpret NMR calculation results is essential for making effective use of predicted chemical shifts.

Chemical Shift Tables ​

The results page displays separate tables for 1H and 13C chemical shifts:

1H (Proton) Shifts:

  • Typical range: 0-12 ppm for most organic molecules
  • Downfield shifts (higher ppm): deshielded protons near electronegative atoms
  • Upfield shifts (lower ppm): shielded protons in alkyl groups
  • TMS reference: all shifts are relative to tetramethylsilane (0.0 ppm)

13C (Carbon) Shifts:

  • Typical range: 0-220 ppm
  • Carbonyl carbons: 160-220 ppm
  • Aromatic/alkene carbons: 100-160 ppm
  • Alkyl carbons: 0-60 ppm
  • TMS reference: relative to tetramethylsilane (0.0 ppm)

Atom Indexing:

  • Indices (H1, H2, C1, C2...) correspond to the canonical SMILES atom order
  • For complex molecules, compare with the 3D viewer where shift labels are overlaid on atoms

Expected Accuracy ​

The calculator provides Mean Absolute Error (MAE) estimates based on the DELTA50 benchmark dataset:

Preset1H MAE13C MAE
B3LYP0.06-0.07 ppm1.6-2.1 ppm
PBE00.07-0.08 ppm1.5-2.0 ppm

Ranges span the 12 supported solvents; see Calculation Presets.

Factors affecting accuracy:

  • Molecule class: MAE values derived from typical organic molecules; unusual functional groups may differ
  • Conformational flexibility: Single-conformer predictions may degrade for very flexible molecules
  • Solvent matching: Use the same solvent as your experimental NMR
  • Scaling factors: Applied automatically using DELTA50 regression parameters

Interpreting MAE:

  • The displayed +/- X.XX ppm indicates typical deviation from experimental values
  • Individual atom shifts may deviate more or less than the average
  • Relative shift ordering is often more reliable than absolute values

Spectrum Visualizations ​

The simulated spectra provide a visual representation of predicted NMR patterns:

Spectrum Features:

  • X-axis: Chemical shift in ppm (reversed: high to low, left to right)
  • Y-axis: Relative intensity (arbitrary units)
  • Peak shape: Lorentzian line broadening centered at each predicted shift
  • 1H spectrum: Typically displayed 0-12 ppm range
  • 13C spectrum: Typically displayed 0-220 ppm range

Using Spectra:

  • Compare overall pattern with experimental spectrum
  • Peak positions should align within expected MAE
  • Relative spacing between peaks is often more reliable than absolute positions
  • Click spectrum images in web UI to enlarge

Download Options:

  • PNG (300 DPI): Good for presentations and documents
  • SVG: Vector format, ideal for publications and scaling

3D Structure Viewer ​

The interactive 3D viewer displays the optimized molecular geometry with shift labels:

Viewer Controls:

  • Rotate: Click and drag
  • Zoom: Scroll wheel
  • Reset view: Double-click

Shift Labels:

  • Blue labels: 1H chemical shifts in ppm
  • Orange labels: 13C chemical shifts in ppm
  • Labels positioned near corresponding atoms
  • Ball-and-stick model with Jmol-style element colors

Downloading Results ​

Recommended file formats for different purposes:

PurposeFormatWhy
Further calculationsXYZUniversal, simple coordinates
Visualization toolsSDFContains bonds, opens in ChemDraw/Avogadro
PublicationsSVGVector graphics, scales without pixelation
PresentationsPNGRaster format, widely compatible
ReproducibilityZIPFull NWChem output for debugging

Structure files:

  • XYZ: Cartesian coordinates only (element + x, y, z)
  • SDF: Includes bond connectivity from original SMILES

Troubleshooting Results ​

Unexpected chemical shifts:

  1. Check solvent matches your experimental conditions
  2. Verify SMILES correctly represents your structure
  3. Consider that some functional groups have higher errors

Missing atoms in 3D viewer:

  • Ensure SMILES includes all atoms (explicit hydrogens if needed)
  • Check for disconnected fragments in SMILES

Large MAE values:

  • Normal for unusual functional groups (phosphorus, sulfur, halogens)
  • Consider that benchmark MAE was derived from specific molecule types
  • Use relative shift ordering rather than absolute values

Calculation failures:

  • Very large molecules may exceed memory limits
  • Unusual bonding patterns may fail geometry optimization
  • Check NWChem output (ZIP download) for specific error messages

For detailed methodology and scientific references, see the Science documentation.